TSP Series Switching Mode DC Power Supply

Introduction
TSP series uses high quality spares, this series has good reliability, low ripple, high efficiency, high output power (high voltage, heavy current), compact size and low weight.
It has automatic switchable CC/CV working modes and perfect protections for safety and high reliability, also it could add over voltage/current protection values preset function, discharging and pulsing output functions for capacitor burn-in use.
Currently, it is widely used for capacitor manufacturing, schools, and institutes etc.

Features

1. Over 200 models, output voltage: 0 ~ 2000V, output current: 0 ~ 300A, output power: 4.5KW-50kW
2. Constant voltage mode and constant current mode, automatic switchable, output voltage / current continuously adjustable from 0 to rated value.
3. Over voltage protection: Over voltage value continuously adjustable from 0 to 110% rated value, auto-shut down when output voltage exceeds the over voltage set point
4. Over current protection: over current protection value continuously adjustable within rated value range, sound & light alarm when output current exceeds set value.
5. Short protection: Withstand short-circuit under start-up or any working modes, sound & light alarm when output has short.
6. Over load protection: Auto-tripping when power supply or load has fault and output current exceeds 1.5 times of rated value
7. Short alarm: sound & light alarm when output voltage lower than 1% of rated value and current higher 110% of rated value. (optional)
8. Automatic off-load and discharging: when power supply shutdown, power supply will automatically cut off load and discharge electric in load for safety. (optional)
9. Output display: Voltage & current both LED digital display (standard), LCD display (optional) or LCD touch screen display (optional)
10. Pulsing working: could add time controller to be pulsing power supply (optional)
11. Communication port: RS232/RS485 for connection with computer to be remote controlled & monitored by computers (optional)
12. Analog signal: 0 ~ 5V (10V) or 4 ~ 20mA analog signal for output voltage & current control (optional)

 
Application

1. Electrolysis capacitor burn-in, tantalum capacitor energizing.
2. DC motor test, burn-in, EV motor test, burn-in.
3. Resistor, relay, motor, transistor and other electronic components burn-in and routine test.
4. Lab, electronic device and automatic test equipment
5. Electronic test device, production line equipment, communication equipment.
6. Electrolysis, electroplating, electrochemical equipment.

 
 
                                                               
Technical Specification

Electrical Characteristics
Input,Output	Input: Single-phase 220Vac±10%, 50Hz±10% Three-phase 380Vac±10%, 50Hz±10% Output:DC C.C. and/or C.V. Max output: as requirements
Accuracy (C.V.)	Line regulation:≤0.1% Of the rated value ± 1 digit (output voltage change ratio under input ±10% change) Stability: ≤0.3% of the rated value (output voltage change ratio due to 8 hours continuously working) Temp. coeff.offset: (within 30mins) ≤0.4‰/℃ of the rated value ± 2 digits (output voltage change ratio due to environment temperature changes) Load regulation:≤0.2% of the rated value ± 1 digit (output voltage change ratio due to output current change from 0 to rated value)
Accuracy (C.C.)	Line regulation: ≤0.1% Of the rated value ± 1 digit (output current change ratio under input ±10% change) Stability: ≤0.3% of the rated value (output current change ratio due to 8 hours continuously working) Temp. coeff.offset: (within 30mins) ≤0.4‰/℃ of the rated value ± 2 digits (output current change ratio due to environment temperature changes) Load regulation(load 0~100%): ≤0.2% of the rated value ± 1 digit (output current change ratio due to output voltage change from 0 to rated value)
Ripple +noise(r.m.s)	CV: ≤0.3% of the rated value+10mV (80%~100% rated output) CC: ≤0.5% of the rated value+10mV (80%~100% rated output)
Ripple +noise(p-p)	≤2% of the rated value+500mV (80%~100% rated output)
Efficiency	≥80%
Programming Output voltage	Adjustable (0~rated value) or CV
Programming output current	Adjustable (0~rated value) or CC
Adjusting mode	10-turn Potentiometer Key button (optional)
Protections function	Output will be cut down when over voltage / over current / over Temp. / lack phase (three-phase input)
Short protection	Auto CC working when short connected, please add short protection if load could not bear long-term short.
Working mode	Withstand long-term continuous working at full load.
Read output	Digital LED LCD (optional)
Display precision	As per output values
Transient response time	≤20ms
Display accuracy	≤±1%±1digit (range:5%~100% of the rated value)
Load characteristic	On demand
Operating condition	Location: indoor use only Temperature:-20°C ~ +40°C Humidity:≤80%
Spare parts	Company standard (fuse*1 set, operation CD*1pc)

● Input Voltage: Power source voltage can be changed to others on request. 
● Custom-made specifications are on request.